Effective October 31, 2024
the plotters and engraving units will be discontinued.

This technology is coming to the end of its life cycle and will not have a direct replacement.

Accessories such as plotter pens, fixtures, engraving needles, etc… will still be offered.

Appearance change for PB ring in Actuator
Description of change:
The circular shape of PB ring is changed to hexagonal.

Click Here

S… Series Contact Element Appearance change
Description of change:
The pad printed marking on the contact element body is changed to laser marking. No other features or specifications of contact elements have been changed.

Click Here

Appearance change for Buzzer Lens
Description of change:
The top surface appearance of the LED buzzer lens has been changed to improve the ingress protection.

Click Here

Appearance change for 103 Lock plate
Description of change:
The projections provided on 103 lock plate have been removed.

Click Here

Product Change (PCN) Notice
(Notification of design change of selected Power Supply products)

Click Here

Product Obsolescence Notice

Effective February 8, 2021
discontinued plotter pens in tip sizes 0.18, 0.5, 0.7 and 1mm.

Unfortunately, we are not able to offer a Last-Time-Buy (LTB) due to the obsolescence of several components that were used in this product.

The 0.25mm and 0.35mm pens are the only pens being produced from this time on.

Click this link for the updated catalog page.

Product Obsolescence Notice

Effective August 2, 2021, discontinued plotter pens with non-etching ink.

Unfortunately, we are not able to offer a Last-Time-Buy (LTB) due to the obsolescence of several components that were used in this product.

The original parts were pens with non-etching ink which is no longer available. The alternates are pens with etching ink. These pens require specific care and handling to avoid the pen drying out due to the fast drying etching ink properties.

Click this link for the recommended alternative items and care instructions.

Product Discontinuation Notice

Effective July 1, 2021, Bernstein will be discontinuing their I88 series plastic body limit switches. These will be replaced by the new IN65 series. Orders can be placed for the I88 series until June 30, 2021, after that these switches will only be available while our supply lasts.

The IN65 limit switch offers many technical advantages including metal mounting surfaces, tool free actuator changes, low current switching capabilities and improved protection ratings and mechanical life. Product information on the new IN65 series, including a cross reference spreadsheet, is available on our website in the Plastic Limit Switch section. - Click Here.

Product Change Notice
Standard Product Label format change on Altech Corporation products

Product Change Notice

Appearance change for some Mushroom Actuators

Fuses - Product Discontinuation Notice

discontinued fuses